Shop

DJI™ Zenmuse X3 Gimbal and Camera

$799.00

SKU: cc266ef13ea7 Category:
Description

[LIST VIEW]

  • Capture 4K Video and 12MP Stills
  • Sony EXMOR 1/2.3″ CMOS Sensor
  • 3-Axis Gimbal Stabilizes Camera
  • Wide 94° FOV Lens
  • Panning: Full 360°
  • Pitch: -90 to and 30°
  • JPEG and DNG RAW Photo Capture
  • Works with Osmo Handle Kit
  • Records to microSD Cards

[/LIST VIEW]

[Product Features]

The Inspire 1 Gimbal and Camera Unit from DJI features the same 4K camera and 3-axis gimbal that is included with ready-to-fly versions of the Inspire 1 quadcopter. It can be used with Inspire 1 – mounting toolessly – or works with the Inspire 1 Camera Mount. The Camera Mount is a separately available handgrip that converts the Gimbal and Camera Unit into a stabilized handheld camera system for use closer to the ground. The gimbal and camera both power from the aircraft flight battery or from a battery that goes with the Camera Mount.

Inspire 1 4K Camera

The Inspire 1 Camera shoots 4K video at 24p and 30p, and can shoot HD video frame rates from 24p to 60p. It features a 1/2.3″ CMOS sensor with a 94-degree field of view (FOV) lens. This field of view works out to about 20mm in 35mm equivalent, which gives you a wide but not extremely wide or fisheye framing – while not as immersive as a fisheye, this FOV features less distortion and gives the subject more emphasis

3-Axis Brushless Motor Gimbal

The camera is mounted via an integrated 3-axis gimbal which uses brushless servo motors to keep the shot stable and the horizon level. The camera pans a full 360-degrees so that no matter which way the quadcopter turns, the camera can remain locked on the subject. Manual panning and tilting can be affected using controls on the transmitter

[/Product Features]

[New Tab]

DJI Zenmuse X3 Gimbal and Camera × 1

* Not including Micro SD Card.

[/New Tab]