DJI™ Digital FPV Experience Combo


SKU: e5c8cf8dc716 Category:


  • All-in-One Digital FPV Solution
  • 28ms Low Latency; up to 2.5-Mile Range
  • 720p120 HD FPV Footage
  • 2 x Air Units with HD Cameras


[Product Features]


Reimagine Your FPV World

The Digital FPV Experience Combo from DJI is designed to provide up to two drones with the ability to stream first-person video for drone racing, aerial cinematography, and more. Usable on aerial drones and other RC vehicles, it includes FPV goggles and two Air Unit Modules with HD cameras. The system is engineered to deliver 720p120 HD FPV footage at a low, 28ms latency from up to 2.5 miles away. The goggles and air units come pre-programmed out of the box to work together, making setup easy. With an embedded remote receiver in each air unit, the addition of a remote controller (not included) can give you camera and flight control.

In order to ensure a stable, high-quality, and immersive FPV signal, the goggles are outfitted with four omnidirectional antennas, while the air unit module has two antennas that each can transmit and receive signals. In addition, you can select from eight different frequency channels. This not only helps to prevent interference but allows for up to eight drones to stream simultaneously.

Aerial footage can be captured, as well as streamed in HD. The air unit and goggles can record footage to optional microSD cards. The goggles can record in HD at 720p60, and the air unit can capture footage at Full HD 1080p60 fps. Recorded footage can instantly be viewed within the FPV goggles.



Are the DJI FPV Goggles compatible with other DJI drones?


Is the DJI FPV Air Unit compatible with third-party cameras?


Is the DJI FPV System compatible with remote controllers of other brands?

Yes, but an additional receiver is required when using the DJI FPV System with other remote controllers. This is something that is not needed when using the DJI FPV Remote Controller.

What ports do the DJI FPV Remote Controller have?

The DJI FPV Remote Controller has a USB Type-C port and a 3.5mm audio interface. To use simulators, you must connect a dongle to the Remote Controller via the 3.5mm audio interface, then connect the dongle to your computer.

Is the DJI FPV Digital System compatible with DJI A3 or N3 flight controller?


DJI FPV Fly More ComboDJI FPV Fly More ComboDJI FPV Fly More ComboDJI FPV Fly More ComboDJI FPV Fly More ComboDJI FPV Fly More ComboDJI FPV Fly More ComboDJI FPV Fly More ComboDJI FPV Fly More ComboDJI FPV Fly More ComboDJI FPV Fly More Combo

[/Product Features]

[New Tab]

Goggles (foam padding included) × 1

Antennas × 4

USB-C Cable × 1

Headband × 1

Sleave × 1

Power Cable × 1

Air Unit (camera included) × 2

Antenna (MMCX elbow) × 4

3-in-1 Cable × 2

M2.0 Screw × 8

Remote Controller – NOT INCLUDED

DJI FPV Fly More Combo what's In  The Box

[/New Tab]